Optiflow™ Nasal High Flow Therapy delivered by AIRVO™ 2 Humidified Nasal High Flow and Tracheostomy High Flow System
The AIRVO 2 is a Humidified High Flow System designed to treat your patients across the care continuum.
- A broad flow range (2 to 60 L/min) takes your patients from the most acute environments (ICU and ED) to the home.
- A system with a built-in flow generator means it’s portable – no need for a noisy, heavy compressor or to be tethered to wall air.
- A variety of interfaces specifically designed with Optiflow High Flow therapy in mind. At higher flows comfort is paramount – you need an interface designed for the job.
Features at a glance:
- Includes dual spiral heater-wires and an integrated temperature sensor. No separate temperature probes or heater-wire adapters required.
- The AIRVO 2 can be used with Optiflow nasal cannula interfaces as well as direct-connect tracheostomy and mask interfaces.
- Oxygen from a concentrator or cylinder can be added. An in-built ultrasonic analyzer requires no calibration, service, or replacement.
- On-screen animation are designed to assist with setup and troubleshooting.
Three temperature settings, 37, 34 and 31 °c and an integrated flow generator delivers flow from 2 – 60 L/min – no wall air required .
Optiflow™ Nasal High Flow Cannula (Adult)
- Evaqua™ technology designed to reduce formation of mobile
- Permeable membrane allows water vapor to freely diffuse through the walls of the
- 3-way connector fits all F&P circuits
- Allows use with both F&P AIRVO™ and F&P 850 systems
- Customizable headstrap provides a secure, soft fit
- No loose strap ends around the face
- Made of softer, tubular material with Stretchwise technology
- Headstrap clip removes the need for a lanyard
- Works in tandem with the tubing clip to support the weight of the circuit, designed to prevent the canula from being dislodged
- Designed to simplify eating, drinking and communicating by keeping the cannula tubing away from the mouth
- Soft cheek pads designed to add stability and reduce pressure on the face
- Larger surface area designed to reduce pressure points
- Improved attachment between check pad and head strap, designed to minimize unintentional disconnection
- Three colour-coded sizes for instant size recognition
- Contoured prongs for a softer, streamlined fit
- Anatomical design to improve airflow and sit comfortably in the nares
- Concave base designed to alleviate pressure on septum
- Contoured to unobtrusively match the shape of the upper lip
Product Codes
| Part No. | Description | Quantity |
| OPT942 | Optiflow™+ Nasal Cannula (small) | 20 per box |
| OPT944 | Optiflow™+ Nasal Cannula (medium) | 20 per box |
| OPT946 | Optiflow™+ Nasal Cannula (large) | 20 per box |
Optiflow™ Junior 2 Nasal Cannula
Waveflex™ technology for prong stability and easier readjustment – The Optiflow Junior 2 cannula uses Waveflex technology to allow for natural facial movement when a patient’s cheeks are compressed. This improves prong stability in the nostrils.
Wide range of sizes and flow ranges – Optiflow Junior 2 offers a range of five cannula sizes with flow ranges from 0.5 to 25 L/min to provide respiratory support for even your smaller patients.
Wigglepads™ 2 allow for easy application and adjustment of the cannula -Wigglepads 2 retains the same technology as the original Wigglepads and applies it to unique shape of the Optiflow Junior 2 cannula.
Optiflow Junior 2 uses FlexiTube to minimize condensate build-up -The FlexiTube is made with a breathable material to reduce condensate build-up by allowing water vapor to diffuse through the membrane to the outside of the tubing.
Product Codes
| Part No. | Description | Quantity |
| OJR410 | Optiflow Junior 2 Nasal Cannula (Extra Small) | 20 per box |
| OJR412 | Optiflow Junior 2 Nasal Cannula (Small) | 20 per box |
| OJR414 | Optiflow Junior 2 Nasal Cannula (Medium) | 20 per box |
| OJR416 | Optiflow Junior 2 Nasal Cannula (Large) | |
| OJR418 | Optiflow Junior 2 Nasal Cannula (Extra Large) ) |
AirSpiral heated breathing tube for F&P AIRVO 2
The new AirSpiral heated breathing tube for AIRVO 2 utilizes an advanced two-spiral design to help protect against condensate
The heating spiral contains heater wire to warm the breathing gas inside the tube. The insulating spiral uses a bubble of warmed air around the breathing gas to shield it from the outside environment. Like a double-paned window, the inside and outside surfaces of the tube are physically separated, to reduce cooling and helps maximize the level of humidity remaining in the gas all the way to the patient.
Features at a glance
Tubing clip: The molded clip attaches to clothes or bedding to allow positioning of the tube during use.
Ergonomically designed: Molded grips at both ends of the tube assist connection and disconnection.
Integrated temperature sensor: No external probes, cables or adaptors required.
Product Code
| Part No. | Description | Quantity |
| 900PT561 | AirSpiral tube and chamber kit for AIRVO | 10 Pack |
MR850 Heated Humidifier One System for All Patients
The MR850 can be used for the full range of Fisher & Paykel Healthcare therapies across the F&P Respiratory Care Continuum™
• Adaptable. One device supports multiple therapies for adult, pediatric and neonatal patients
• Reliable. Proven to consistently perform
• Robust. Designed to withstand daily hospital use
• Flow sensor technology. Automatic standby during periods of gas flow interruption
• Condensation Control and Humidity Compensation. Automatic algorithms designed to reduce mobile circuit condensate
Product Code: MR-850
Product Code: MR-850
Neopuff Infant T-Piece Resuscitator
The Neopuff is a T-piece resuscitator designed by Fisher & Paykel Healthcare to deliver controlled, consistent, and precise pressures – independent of operator experience.
It can provide assisted respiratory breaths to neonates and infants (up to 10 kg) in the delivery room or neonatal intensive care unit (NICU).
Neopuff product features
The Neopuff can deliver oxygen levels ranging from 21% through to 100%, from a flow meter or blender. The resuscitator has a PIP control, as well as a maximum pressure relief valve that prevents the accidental delivery of excessively high pressures.The Neopuff features an accurate, easy-to-read, medical quality manometer, and can be mounted on a pole, rail, wall, infant warmer, or incubator.
Bubble CPAP System.
The Fisher & Paykel Healthcare Bubble CPAP generator is designed to provide consistent pressure through an auto-leveling feature. This design moves excess liquid into a separate chamber from the main pressure-generating section, automatically ensuring that the set pressure does not change with liquid build-up.
The bubble generator includes an overflow container that can be detached to remove excess water from the system, without disrupting delivery therapy.
Continuous positive airway pressure (CPAP) therapy delivers a heated and humidified blend of air and oxygen while at the same time generating a continuous distending pressure throughout the respiratory cycle. Fisher & Paykel Healthcare offers a system including circuits, a pressure relief manifold, and Bubble CPAP generator.
Evaqua™ 2 Breathing Circuits
EVAQUA technology allows water vapor to diffuse out through the expiratory limb wall before it has an opportunity to condense into liquid water within the circuit limb or the ventilator. The result is an easy-to-use circuit which promotes a closed system and can reduce clinician intervention.
- Minimizes inspiratory and expiratory condensation
- Promotes a closed system
- Minimizes condensate-related ventilator alarms
- Filters remain dry
- Circuit maintenance time is reduced
- Evaqua 2 available in selected markets
Adult Evaqua Breathing Circuits
| Part No. | Description | Quantity |
| RT380 | Dual Limb Adult Breathing Circuit Kit with Evaqua 2 Technology | 10/box |
| RT385 | Dual Limb Adult Breathing Circuit Kit with Evaqua 2 Technology and Pressure Line | 10/box |
Infant Evaqua Breathing Circuits
| Part No. | Description | Quantity |
| RT265 | Dual Limb Infant Breathing Circuit Kit with Evaqua 2 Technology and Pressure Line (/Flow > 4L/min) | 10/box |
| RT266 | Dual Limb Infant Breathing Circuit Kit with Evaqua 2 Technology and Pressure Line (Flow > 0.3-4L/min) | 10/box |
| RT267 | Dual Limb Infant Breathing Circuit Kit with Evaqua 2 Technology and Pressure Line for SLE2000 Series Ventilators | 10/box |
| RT268 | Dual Limb Infant Breathing Circuit Kit with Evaqua 2 Technology and Pressure Line for SLE5000 Series Ventilators | 10/box |
FACE MASK
Fisher & Paykel Healthcare produces a range of masks to supply humidified gas during noninvasive therapies. The complete range is compatible with all humidifiers produced by Fisher & Paykel Healthcare. The masks are designed with patient comfort in mind, while ensuring delivery of the desired gas flow and pressure levels determined by the therapy.
Designed for noninvasive ventilation, the FreeMotion™ mask range includes both vented and nonvented full face masks, as well as a vented nasal mask. All four masks are designed to maximize patient tolerance to treatment through superior comfort and performance.
The FreeMotion full face masks incorporate a seal that fits under the chin, accommodating a far greater range of face shapes and sizes compared with the traditional under lip seals. The under-chin design aims to maintain the integrity of the seal at all times
The RT040 range of vented full face masks incorporates 15 small vent holes at the bridge of the nose. These vents provide better elimination of CO2 from the mask, while being significantly quieter than a single-port vent.
Product Code
| Part No. | Description | Quantity |
| RT040S | Vented full face mask; Small size | 10/box |
| RT040M | Vented full face mask; Medium size | 10/box |
| RT040L | Vented full face mask; Large size | 10/box |
| RT041S | Non-vented full face mask; Small size | 10/box |
| RT041M | Non-vented full face mask; Medium size | 10/box |
| RT041L | Non-vented full face mask; Large size | 10/box |
Nivairo™ RT045 Anti-asphyxiation Valve Version
Key Features:
• Single limb non-vented full face mask with an anti-asphyxiation valve for safety in case of ventilator failure
• RollFit™ seal adapts to different face shapes and minimizes pressure on the bridge of the nose
• TubeFit™ zones for placement of a nasogastric or orogastric tubes
• ErgoFit™ with easy clips and breathable fabric to help with fitting and adjusting
• Available in four mask sizes: extra small, small, medium and large
Application:
• For use with single limb bi-level or ventilator systems where venting is provided in the circuit or through the exhalation port
• Also for use with flow driver CPAP systems with provided PEEP valve
Product Code
| Part No. | Description | Quantity |
| RT045XS | Non-vented hospital full face mask with anti-asphyxiation valve; Extra small | 10/box |
| RT045S | Non-vented hospital full face mask with anti-asphyxiation valve; Small | 10/box |
| RT045M | Non-vented hospital full face mask with anti-asphyxiation valve; Medium | 10/box |
| RT045L | Non-vented hospital full face mask with anti-asphyxiation valve; Large | 10/box |
Nivairo™ RT046 Standard Elbow Version
Key Features:
• Standard elbow version for dual limb set ups
• RollFit™ seal adapts to different face shapes and minimizes pressure on the bridge of the nose
• TubeFit™ zones for placement of a nasogastric or orogastric tubes
• ErgoFit™ with easy clips and breathable fabric to help with fitting and adjusting
• Available in four mask sizes: extra small, small, medium and large
Application:
For use with dual limb systems
Product Code
| Part No. | Description | Quantity |
| RT046XS | Non-vented hospital full face mask with standard elbow; Extra small | 10/box |
| RT046S | Non-vented hospital full face mask with standard elbow; Small | 10/box |
| RT046M | Non-vented hospital full face mask with standard elbow; Medium | 10/box |
| RT046L | Non-vented hospital full face mask with standard elbow; Large | 10/box |
MR290 Auto-Fill Humidification Chamber
• Suitable for all MR-series humidifiers
• Automatically refills
• Dual-float mechanism for added safety to prevent the chamber overfilling
• Consistent compressible volume allows for consistent delivery of the prescribed waveform
MR225 Manual-Fill Infant Chamber
• Designed for neonatal and pediatric patients
• Low compliance, compressible volume and resistance to flow – optimal for high frequency oscillators and CPAP generators
Ultrasonic Nebulizer and Humidifier
Recommended for the treatment of respiratory pathologies through aerosols and humidification sessions. Aerosols generated through ultrasonic technology. Optimal size and great homogeneity of the particles for greater treatment efficiency. Low noise. Enables the nebulisation of volume from 2 to 30 ml in aerosoltherapie and 0,2 to 1L in use as humidifier
Nebulisation sets:
– Patented system Control’Dose® optimising the drug inhaled fraction
– Set delivered with mask and valved mouthpiece reducing the vasted volume
Humidification sets:
– Closed system avoiding direct contact with the device preventing infection & contamination risks
– Universal connecting system compatible with most typs of sterile water bottles
– Various settings and functionalities : detection system in the nebulisation chamber, timer, automatic memory of previous settings,management of the quartz, intelligent alarm system,adjustable temperature …
Product Code :
DP-100+
Ultrasonic Nebulizer and Humidifier
Recommended for the treatment of respiratory pathologies through aerosols and humidification sessions. Aerosols generated through ultrasonic technology. Optimal size and great homogeneity of the particles for greater treatment efficiency. Low noise. Enables the nebulisation of volume from 2 to 30 ml in aerosoltherapie and 0,2 to 1L in use as humidifier.
Nebulisation sets:
– Patented system Control’Dose® optimising the drug inhaled fraction
– Set delivered with mask and valved mouthpiece reducing the vasted volume
